Solid State and Fiber Lasers
Raum K1Chairman: Hans-Dieter Hoffmann, Fraunhofer ILT, Aachen (D)
14:00 - 14:30
High Efficiency Converter Laser
Dr. Matthias Ackermann, Laserline GmbH, Mülheim-Kärlich (D)
14:30 - 15:00
High Average Power Ultrafast Lasers with High Flexibility for Materials Processing
Dr. Dirk Sutter, TRUMPF Laser GmbH, Schramberg (D)
15:00 - 15:30
Scalable Short Pulse Fiber Lasers
Michael Lee, IPG Laser GmbH, Burbach (D)
15:30 - 16:00
Coffee Break - Visit of the Sponsor's Exhibition
Ultrafast Lasers - Beam Sources
Raum K1Chairman: Dr. Peter Rußbüldt, Fraunhofer ILT, Aachen (D)
08:30 - 09:00
Advanced Photon Sources - Extending the Parameter Range of Ultrafast Lasers
Hans-Dieter Hoffmann, Fraunhofer ILT, Aachen (D)
09:00 - 09:30
High Energy Ultrashort Pulsed Laser Sources at 2 µm and Beyond - Results from the NUCLEUS Project
Dr. Maik Frede, neoLASE GmbH, Hannover (D)
09:30 - 10:00
Ultrafast Thin-Disk Amplifiers
Dr. Thomas Metzger, TRUMPF Scientific Lasers GmbH + Co. KG, München (D)
10:00 - 11:00
Kaffeepause - Besuch der Sponsorenausstellung
Lasers with Tailored Wavelengths
Raum K1Chairman: Dr. Bernd Jungbluth, Fraunhofer ILT, Aachen (D)
11:00 - 11:30
Green High-Power Disk Lasers and Industrial Applications
Dr. Evangelos Papastathopoulos, TRUMPF Laser AG, Schramberg (D)
11:30 - 12:00
Mid-Infrared Short and Ultrashort Pulsed Lasers for Materials Processing
Dr. Sebastian Nyga, Fraunhofer ILT, Aachen (D)
12:00 - 12:30
2 µm Fiber Laser for Industrial Use
Dr. Peter Fuhrberg, Futonics Laser GmbH, Göttingen (D)
12:30 - 14:30
Lunch - Visit of the Sponsors' Exhibition
Diodenlaser
Raum K1Chairman: Dr. Martin Traub, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Blue and Infrared High Power Laser Diodes for Material Processing
Dr. Harald König, ams-OSRAM International GmbH, Regensburg (D)
15:00 - 15:30
Efficient High Brightness and High Power Laser Diode Bars operated on Passively Cooled Heat-Sinks
Dr. Ralf Hülsewede, JENOPTIK Optical Systems GmbH, Berlin (D)
15:30 - 16:00
VCSEL for 3D Sensing and LIDAR Applications
Dr. Holger Mönch, TRUMPF Photonic Components GmbH, Ulm (D)
Perspectives for the Laser Source Development
Raum EuropaChairman: Prof. Constantin Häfner, Fraunhofer ILT, Aachen (D)
08:30 - 09:00
New Mission Areas for Photonics through Societal, Geospatial and Ecological Challenges
Prof. Constantin Häfner, Fraunhofer ILT, Aachen (D)
09:00 - 10:00
Perspectives for the Laser Source Development
Dr. Christian Schmitz, TRUMPF GmbH + Co. KG, Ditzingen (D)
Dr. Mark Sobey, Coherent Inc., Santa Clara (USA)
Volker Krause, Laserline GmbH, Mülheim-Kärlich (D)
10:00 - 10:40
Panel Discussion with the Speakers
10:40 - 11:15
Coffee Break - Visit of the sponsors' exhibition
Digitization in Photonic Production
Raum EuropaChairman: Prof. Constantin Häfner, Fraunhofer ILT, Aachen (D)
11:15 - 11:35
Digitization in Photonic Production
Dr. Joachim Döhner, KUKA Systems GmbH, Augsburg (D)
11:35 - 11:55
Next Generation of Data Driven Lasermachines - Much more than Cutting
Dr. Jens Ottnad, TRUMPF Werkzeugmaschinen SE + Co. KG, Ditzingen (D)
11:55 - 12:15
Additive Manufacturing - Digital and Smart
Dr. Tobias Kamps, Siemens AG, München (D)
12:15 - 12:30
Panel Discussion with the Speakers
12:30 - 14:00
Lunch - Visit of the Sponsors' Exhibition
Seminar Laser Technology ABC's
Raum K4-K5Chairman: Prof. Arnold Gillner, Fraunhofer ILT, Aachen (D)
12:30 - 13:00
Raum K4-K5Basics of Laser Applications
Dr. Florian Klämpfl, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen (D)
13:30 - 14:00
Raum K4-K5Diode Lasers and their Applications
Markus Rütering, Laserline GmbH, Mülheim-Kärlich (D)
14:00 - 14:30
Raum K4-K5Power and Precision - Pulsed Lasers for Highest Accuracy
Dr. Alexander Knitsch, TRUMPF Laser- und Systemtechnik GmbH, Ditzingen (D)
14:30 - 15:30
Raum K4-K5Coffee Break - Visit of the Sponsors' Exhibition
15:30 - 16:00
Raum K4-K5Modern Scanning Systems for Laser Machining
Dr. Holger Schlüter, Scanlab GmbH, München (D)
16:00 - 16:30
Raum K4-K5Sensors, Measuring Instruments, Software - Ingredients for Intelligent Quality Assurance
Dr. Markus Kogel-Hollacher, Precitec Optronik GmbH, Neu-Isenburg (D)
16:30 - 17:00
Raum K4-K5X-Ray Hazards and Radiation Protection Aspects in Ultrashort Laser Processing
Jörg Krüger, Bundesanstalt für Materialforschung und -prüfung BAM, Berlin (D)
17:00 - 17:30
Raum K4-K5Future Applications of Laser Technology - An Outlook
Prof. Arnold Gillner, Fraunhofer ILT, Aachen (D)
Forum Process Control & Digitization
Raum BrüsselChairman: Peter Abels, Fraunhofer ILT, Aachen (D)
10:00 - 10:30
3D Geometry Recognition and Digital Process Chain for DED Processes
Dr. Oliver Steffens, Lunovu GmbH, Herzogenrath (D)
10:30 - 11:00
Process Monitoring for Additive Manufacturing using Sensor Fusion Approach
Emil Duong, Fraunhofer ILT, Aachen (D)
11:00 - 11:30
Automatic Monitoring of Laser Welding Processes with Robotic Guidance
Charlotte Helzle, hema electronic GmbH, Aalen (D)
11:30 - 12:00
Online Detection of Defects during Laser Brazing using AI
Dr. Michael Ungers, Scansonic MI GmbH, Berlin (D)
12:00 - 14:00
Lunch - Visit of the Sponsors' Exhibition
14:00 - 14:30
AI assisted In Situ Quality Inspection of Laser Welded Hairpin Joints
Johannes Gaigl, MAHLE International GmbH, Stuttgart (D)
14:30 - 15:00
Seeing the Unseen - Sensors with Sophisticated Data Models enable Higher Manufacturing Quality
Dr. Markus Kogel-Hollacher, Precitec Optronik GmbH, Neu-Isenburg (D)
15:00 - 15:30
Challenges and Opportunities of Digitalization- and Sensor Concepts for Industrial Production
Frederic Schulze, Fraunhofer ILT, Aachen (D)
15:30 - 16:30
Coffee Break - Visit of the Sponsors' Exhibition
16:30 - 17:00
Convenience through Connectivity: OPC Unified Architecture for LPBF Systems
Thorsten Schreiner, AixPath GmbH, Aachen (D)
17:00 - 17:30
Acoustic Quality Monitoring in Laser Material Processing: An Overview
Dr. Wolfgang Rohringer, XARION Laser Acoustics GmbH, Wien (AT)
Forum Laser Additive Manufacturing
Raum EuropaChairman: Jasmin Saewe & Dr. Thomas Schopphoven, Fraunhofer ILT, Aachen (D)
10:00 - 10:30
Additive Manufacturing of Rocket Engine Components by Means of Laser Metal Deposition (LMD)
Dr. Steffen Beyer, Ariane Group GmbH, Taufkirchen (D)
10:30 - 11:00
Rapid Alloy Development for Coating, Repair and Additive Manufacturing
Dr. Arkadi Zikin, Oerlikon Metco AG, Wohlen (CH)
11:00 - 11:30
Industrialization of Laser Cladding for Volume Production
Tom De Bruyne, Laser Cladding Venture - Member of the SKF Group, Oudsbergen (B)
11:30 - 12:00
EHLA 3D - Further Development of the Extreme High-Speed Laser Material Deposition for Additive Manufacturing
Min-Uh Ko, Fraunhofer ILT, Aachen (D)
12:00 - 14:00
Lunch - Visit of the Sponsors' Exhibition
14:00 - 14:30
Laser Material Deposition with Diode Lasers
Dr. Sörn Ocylok, Laserline GmbH, Mülheim-Kärlich (D)
14:30 - 15:00
Insight into Laser Metal Fusion with Process Sensorics
Dr. Marc Gronle, TRUMPF Laser- und Systemtechnik GmbH, Ditzingen (D)
15:00 - 15:30
Development of Functional LPBF-Prototypes for the Chassis Area
Raphael Koch, Ford-Werke GmbH, Aachen (D)
15:30 - 16:30
Coffee Break - Visit of the Sponsor's Exhibition
16:30 - 17:00
The Data Chain in Laser Based Powder Bed Systems
Dr. Bart Van der Schueren, Materialise NV, Leuven (B)
17:00 - 17:30
Less is More: Using Savings Potential with Simulation
Keno Kruse, CADFEM GmbH, Hannover (D)
Dinner with Presentation of the Innovation Award Laser Technology
Krönungssaal/Rathaus Aachen19:00 - 23:00
Coronation HallDinner with Presentation of the Innovation Award Laser Technology
Laser Powder Bed Fusion LPBF
Raum EuropaChairman: Jasmin Saewe, Fraunhofer ILT, Aachen (D)
14:00 - 14:30
Digital Production with Innovative Steel Materials
Dr. Simon Höges, GKN Additive, Bonn (D)
14:30 - 15:00
Modelling Laser Powder Bed Fusion Processes - Goals, Achievements and Gaps
Dr. Mustafa Megahed, ESI Software Germany GmbH, Essen (D)
15:00 - 15:30
Process and Systems Engineering to increase Productivity in Laser Powder Bed Fusion
Tim Lantzsch, Fraunhofer ILT, Aachen (D)
15:30 - 16:00
Coffee Break - Visit of the Sponsors' Exhibition
Cutting
Raum EuropaChairman: Dr. Dirk Petring, Fraunhofer ILT, Aachen (D)
08:30 - 09:00
Enhancing Cutting Performance with an Oscillating Laser Beam
Takaaki Yamanashi, AMADA Co. Ltd, Kanagawa (JP)
09:00 - 09:30
Higher Power - Higher Performance?
Prof. John Powell, Lulea University of Technology, Lulea (SE) / Laser Expertise Ltd., Nottingham (UK)
09:30 - 10:00
Use of Acoustic Resonances in Laser Beam Cutting - The Cutting Whistle
Marcelo de Oliveira Lopes, RWTH Aachen University - LLT, Aachen (D)
10:00 - 11:00
Coffee Break - Visit of the sponsors' exhibition
Laser Welding
Raum EuropaChairman: Dr. Dirk Petring, Fraunhofer ILT, Aachen (D)
11:00 - 11:30
Laser Beam Welding in Vacuum - Industrial Implementations by LaVa-X
Dr. Christian Otten, LaVa-X GmbH, Herzogenrath (D)
11:30 - 12:00
Welding of Thick Metal Plates with Laser - Where are the Limits?
Prof. Michael Rethmeier, Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin (D)
12:00 - 12:30
MultiPROmobil - Digital Twin meets Multifunctional Laser Robot
Martin Dahmen, Fraunhofer ILT, Aachen (D)
12:30 - 14:30
Lunch - Visit of the Sponsors' Exhibition
Laser Material Deposition
Raum EuropaChairman: Dr. Thomas Schopphoven, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Requirements for Brake Disc Coatings from an OEM Perspective
Dr. Sebastian Gramstat, Audi AG, Ingolstadt (D)
15:00 - 15:30
Coaxial Laser Arc Hybrid LMD with Wire for Additive Manufacturing
Max Fabian Steiner, Fraunhofer ILT, Aachen (D)
15:30 - 16:00
Automation of Hybrid-Additive Process Chains with Adaptive Processes
Jan Bremer, BCT Steuerungs- und DV-Systeme GmbH, Dortmund (D)
Micro Structuring
Raum BrüsselChairman: Martin Reininghaus, Fraunhofer ILT, Aachen (D)
14:00 - 14:30
High-tech Mastering for the Endless Structuring for Micro- and Nanofunctionalized Films
Dr. Tom Felbeck, temicon GmbH, Dortmund (D)
14:30 - 15:00
Machine Technology for Industrial Laser Micromachining
Dr. Jens Holtkamp, Pulsar Photonics GmbH, Herzogenrath (D)
15:00 - 15:30
New Perspectives in Micro Processing with GHz Ultrashort Pulse Lasers
Dr. Clemens Hönninger, Amplitude Laser Group, Pessac (F)
15:30 - 16:00
Coffee Break - Visit of the Sponsors' Exhibition
Micro Joining
Raum BrüsselChairman: Dr. Alexander Olowinsky, Fraunhofer ILT, Aachen (D)
08:30 - 09:00
Micro Welding with Temporal and Spatial Beam Modulation
Dr. André Häusler, Fraunhofer ILT, Aachen (D)
09:00 - 09:30
Laser Micro Welding of Novel Type of Hermetic Lids for Energy Storage Devices
Georg Haselhorst, SCHOTT AG, Mainz (D)
09:30 - 10:00
Flexible Use of Laser Beam Technology for E-Mobility
Dr. Jan-Philipp Weberpals, Subject Specialist Laser Beam Processes for Car Body Construction and Electromobility, Audi AG, Neckarsulm (D)
10:00 - 11:00
Coffee Break - Visit of the Sponsors' Exhibition
Ultrafast Lasers - Applications
Raum BrüsselChairman: Prof. Arnold Gillner, Fraunhofer ILT, Aachen (D)
11:00 - 11:30
Digitization for Highly Accurate 3D Laser Processing of Customer-Specific Tool
Dr. Claus Dold, Fritz Studer AG - EWAG Zweigniederlassung, Etziken (CH)
11:30 - 12:00
Ultrashort Pulsed Laser Processing for Sustainable Applications
Dr. Karsten Lange, Fraunhofer ILT, Aachen (D)
12:00 - 12:30
Next Level Laser Processes for Gasturbine Manufacturing
Marcel Vollgold, Siemens Energy Global GmbH & Co. KG, Berlin (D)
12:30 - 14:30
Lunch - Visit of the Sponsors' Exhibition
Polishing and Thin Film Processing
Raum BrüsselChairman: Dr. Edgar Willenborg, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Fully Digitalized Production Chain with Laser Ablation and Laser Polishing for the Manufacturing of Interocular Lenses
Prof. Reinhart Poprawe, ETERNATECH GmbH, Aachen (D)
15:00 - 15:30
Laser Sintering of Solid-State Battery Layers
Dr. Ralph Delmdahl, Coherent LaserSystems GmbH & Co. KG, Göttingen (D)
15:30 - 16:00
Smart Products through Functional Layers
Dr. Christian Vedder, Fraunhofer ILT, Aachen (D)
Laser Technology Live
Fraunhofer ILT16:30 - 19:30
Laser Technology Live
Networking at Eurogress Conference Center
20:00 - 23:00
Networking at Eurogress Conference Center
New Business Areas with Laser Technology - Gas Leak Detection with Helicopter based LIDAR Systems
Raum Europa16:00 - 16:30
Outlook
Matthias Ulbricht, ADLARES GmbH, Teltow (D)
Forum Laser Additive Manufacturing
Raum EuropaChairman: Jasmin Saewe & Dr. Thomas Schopphoven, Fraunhofer ILT, Aachen (D)
10:00 - 10:30
Additive Manufacturing of Rocket Engine Components by Means of Laser Metal Deposition (LMD)
Dr. Steffen Beyer, Ariane Group GmbH, Taufkirchen (D)
10:30 - 11:00
Rapid Alloy Development for Coating, Repair and Additive Manufacturing
Dr. Arkadi Zikin, Oerlikon Metco AG, Wohlen (CH)
11:00 - 11:30
Industrialization of Laser Cladding for Volume Production
Tom De Bruyne, Laser Cladding Venture - Member of the SKF Group, Oudsbergen (B)
11:30 - 12:00
EHLA 3D - Further Development of the Extreme High-Speed Laser Material Deposition for Additive Manufacturing
Min-Uh Ko, Fraunhofer ILT, Aachen (D)
12:00 - 14:00
Lunch - Visit of the Sponsors' Exhibition
14:00 - 14:30
Laser Material Deposition with Diode Lasers
Dr. Sörn Ocylok, Laserline GmbH, Mülheim-Kärlich (D)
14:30 - 15:00
Insight into Laser Metal Fusion with Process Sensorics
Dr. Marc Gronle, TRUMPF Laser- und Systemtechnik GmbH, Ditzingen (D)
15:00 - 15:30
Development of Functional LPBF-Prototypes for the Chassis Area
Raphael Koch, Ford-Werke GmbH, Aachen (D)
15:30 - 16:30
Coffee Break - Visit of the Sponsor's Exhibition
16:30 - 17:00
The Data Chain in Laser Based Powder Bed Systems
Dr. Bart Van der Schueren, Materialise NV, Leuven (B)
17:00 - 17:30
Less is More: Using Savings Potential with Simulation
Keno Kruse, CADFEM GmbH, Hannover (D)
Forum Laser Additive Manufacturing
Raum EuropaChairman: Jasmin Saewe & Dr. Thomas Schopphoven, Fraunhofer ILT, Aachen (D)
10:00 - 10:30
Additive Manufacturing of Rocket Engine Components by Means of Laser Metal Deposition (LMD)
Dr. Steffen Beyer, Ariane Group GmbH, Taufkirchen (D)
10:30 - 11:00
Rapid Alloy Development for Coating, Repair and Additive Manufacturing
Dr. Arkadi Zikin, Oerlikon Metco AG, Wohlen (CH)
11:00 - 11:30
Industrialization of Laser Cladding for Volume Production
Tom De Bruyne, Laser Cladding Venture - Member of the SKF Group, Oudsbergen (B)
11:30 - 12:00
EHLA 3D - Further Development of the Extreme High-Speed Laser Material Deposition for Additive Manufacturing
Min-Uh Ko, Fraunhofer ILT, Aachen (D)
12:00 - 14:00
Lunch - Visit of the Sponsors' Exhibition
14:00 - 14:30
Laser Material Deposition with Diode Lasers
Dr. Sörn Ocylok, Laserline GmbH, Mülheim-Kärlich (D)
14:30 - 15:00
Insight into Laser Metal Fusion with Process Sensorics
Dr. Marc Gronle, TRUMPF Laser- und Systemtechnik GmbH, Ditzingen (D)
15:00 - 15:30
Development of Functional LPBF-Prototypes for the Chassis Area
Raphael Koch, Ford-Werke GmbH, Aachen (D)
15:30 - 16:30
Coffee Break - Visit of the Sponsor's Exhibition
16:30 - 17:00
The Data Chain in Laser Based Powder Bed Systems
Dr. Bart Van der Schueren, Materialise NV, Leuven (B)
17:00 - 17:30
Less is More: Using Savings Potential with Simulation
Keno Kruse, CADFEM GmbH, Hannover (D)
Forum Process Control & Digitization
Raum BrüsselChairman: Peter Abels, Fraunhofer ILT, Aachen (D)
10:00 - 10:30
3D Geometry Recognition and Digital Process Chain for DED Processes
Dr. Oliver Steffens, Lunovu GmbH, Herzogenrath (D)
10:30 - 11:00
Process Monitoring for Additive Manufacturing using Sensor Fusion Approach
Emil Duong, Fraunhofer ILT, Aachen (D)
11:00 - 11:30
Automatic Monitoring of Laser Welding Processes with Robotic Guidance
Charlotte Helzle, hema electronic GmbH, Aalen (D)
11:30 - 12:00
Online Detection of Defects during Laser Brazing using AI
Dr. Michael Ungers, Scansonic MI GmbH, Berlin (D)
12:00 - 14:00
Lunch - Visit of the Sponsors' Exhibition
14:00 - 14:30
AI assisted In Situ Quality Inspection of Laser Welded Hairpin Joints
Johannes Gaigl, MAHLE International GmbH, Stuttgart (D)
14:30 - 15:00
Seeing the Unseen - Sensors with Sophisticated Data Models enable Higher Manufacturing Quality
Dr. Markus Kogel-Hollacher, Precitec Optronik GmbH, Neu-Isenburg (D)
15:00 - 15:30
Challenges and Opportunities of Digitalization- and Sensor Concepts for Industrial Production
Frederic Schulze, Fraunhofer ILT, Aachen (D)
15:30 - 16:30
Coffee Break - Visit of the Sponsors' Exhibition
16:30 - 17:00
Convenience through Connectivity: OPC Unified Architecture for LPBF Systems
Thorsten Schreiner, AixPath GmbH, Aachen (D)
17:00 - 17:30
Acoustic Quality Monitoring in Laser Material Processing: An Overview
Dr. Wolfgang Rohringer, XARION Laser Acoustics GmbH, Wien (AT)
Forum Process Control & Digitization
Raum BrüsselChairman: Peter Abels, Fraunhofer ILT, Aachen (D)
10:00 - 10:30
3D Geometry Recognition and Digital Process Chain for DED Processes
Dr. Oliver Steffens, Lunovu GmbH, Herzogenrath (D)
10:30 - 11:00
Process Monitoring for Additive Manufacturing using Sensor Fusion Approach
Emil Duong, Fraunhofer ILT, Aachen (D)
11:00 - 11:30
Automatic Monitoring of Laser Welding Processes with Robotic Guidance
Charlotte Helzle, hema electronic GmbH, Aalen (D)
11:30 - 12:00
Online Detection of Defects during Laser Brazing using AI
Dr. Michael Ungers, Scansonic MI GmbH, Berlin (D)
12:00 - 14:00
Lunch - Visit of the Sponsors' Exhibition
14:00 - 14:30
AI assisted In Situ Quality Inspection of Laser Welded Hairpin Joints
Johannes Gaigl, MAHLE International GmbH, Stuttgart (D)
14:30 - 15:00
Seeing the Unseen - Sensors with Sophisticated Data Models enable Higher Manufacturing Quality
Dr. Markus Kogel-Hollacher, Precitec Optronik GmbH, Neu-Isenburg (D)
15:00 - 15:30
Challenges and Opportunities of Digitalization- and Sensor Concepts for Industrial Production
Frederic Schulze, Fraunhofer ILT, Aachen (D)
15:30 - 16:30
Coffee Break - Visit of the Sponsors' Exhibition
16:30 - 17:00
Convenience through Connectivity: OPC Unified Architecture for LPBF Systems
Thorsten Schreiner, AixPath GmbH, Aachen (D)
17:00 - 17:30
Acoustic Quality Monitoring in Laser Material Processing: An Overview
Dr. Wolfgang Rohringer, XARION Laser Acoustics GmbH, Wien (AT)
Seminar Laser Technology ABC's
Raum K4-K5Chairman: Prof. Arnold Gillner, Fraunhofer ILT, Aachen (D)
12:30 - 13:00
Raum K4-K5Basics of Laser Applications
Dr. Florian Klämpfl, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen (D)
13:30 - 14:00
Raum K4-K5Diode Lasers and their Applications
Markus Rütering, Laserline GmbH, Mülheim-Kärlich (D)
14:00 - 14:30
Raum K4-K5Power and Precision - Pulsed Lasers for Highest Accuracy
Dr. Alexander Knitsch, TRUMPF Laser- und Systemtechnik GmbH, Ditzingen (D)
14:30 - 15:30
Raum K4-K5Coffee Break - Visit of the Sponsors' Exhibition
15:30 - 16:00
Raum K4-K5Modern Scanning Systems for Laser Machining
Dr. Holger Schlüter, Scanlab GmbH, München (D)
16:00 - 16:30
Raum K4-K5Sensors, Measuring Instruments, Software - Ingredients for Intelligent Quality Assurance
Dr. Markus Kogel-Hollacher, Precitec Optronik GmbH, Neu-Isenburg (D)
16:30 - 17:00
Raum K4-K5X-Ray Hazards and Radiation Protection Aspects in Ultrashort Laser Processing
Jörg Krüger, Bundesanstalt für Materialforschung und -prüfung BAM, Berlin (D)
17:00 - 17:30
Raum K4-K5Future Applications of Laser Technology - An Outlook
Prof. Arnold Gillner, Fraunhofer ILT, Aachen (D)
Seminar Laser Technology ABC's
Raum K4-K5Chairman: Prof. Arnold Gillner, Fraunhofer ILT, Aachen (D)
12:30 - 13:00
Raum K4-K5Basics of Laser Applications
Dr. Florian Klämpfl, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen (D)
13:30 - 14:00
Raum K4-K5Diode Lasers and their Applications
Markus Rütering, Laserline GmbH, Mülheim-Kärlich (D)
14:00 - 14:30
Raum K4-K5Power and Precision - Pulsed Lasers for Highest Accuracy
Dr. Alexander Knitsch, TRUMPF Laser- und Systemtechnik GmbH, Ditzingen (D)
14:30 - 15:30
Raum K4-K5Coffee Break - Visit of the Sponsors' Exhibition
15:30 - 16:00
Raum K4-K5Modern Scanning Systems for Laser Machining
Dr. Holger Schlüter, Scanlab GmbH, München (D)
16:00 - 16:30
Raum K4-K5Sensors, Measuring Instruments, Software - Ingredients for Intelligent Quality Assurance
Dr. Markus Kogel-Hollacher, Precitec Optronik GmbH, Neu-Isenburg (D)
16:30 - 17:00
Raum K4-K5X-Ray Hazards and Radiation Protection Aspects in Ultrashort Laser Processing
Jörg Krüger, Bundesanstalt für Materialforschung und -prüfung BAM, Berlin (D)
17:00 - 17:30
Raum K4-K5Future Applications of Laser Technology - An Outlook
Prof. Arnold Gillner, Fraunhofer ILT, Aachen (D)
Dinner with Presentation of the Innovation Award Laser Technology
Krönungssaal/Rathaus Aachen19:00 - 23:00
Coronation HallDinner with Presentation of the Innovation Award Laser Technology
Dinner with Presentation of the Innovation Award Laser Technology
Krönungssaal/Rathaus Aachen19:00 - 23:00
Coronation HallDinner with Presentation of the Innovation Award Laser Technology
Laser Powder Bed Fusion LPBF
Raum EuropaChairman: Jasmin Saewe, Fraunhofer ILT, Aachen (D)
14:00 - 14:30
Digital Production with Innovative Steel Materials
Dr. Simon Höges, GKN Additive, Bonn (D)
14:30 - 15:00
Modelling Laser Powder Bed Fusion Processes - Goals, Achievements and Gaps
Dr. Mustafa Megahed, ESI Software Germany GmbH, Essen (D)
15:00 - 15:30
Process and Systems Engineering to increase Productivity in Laser Powder Bed Fusion
Tim Lantzsch, Fraunhofer ILT, Aachen (D)
15:30 - 16:00
Coffee Break - Visit of the Sponsors' Exhibition
Laser Powder Bed Fusion LPBF
Raum EuropaChairman: Jasmin Saewe, Fraunhofer ILT, Aachen (D)
14:00 - 14:30
Digital Production with Innovative Steel Materials
Dr. Simon Höges, GKN Additive, Bonn (D)
14:30 - 15:00
Modelling Laser Powder Bed Fusion Processes - Goals, Achievements and Gaps
Dr. Mustafa Megahed, ESI Software Germany GmbH, Essen (D)
15:00 - 15:30
Process and Systems Engineering to increase Productivity in Laser Powder Bed Fusion
Tim Lantzsch, Fraunhofer ILT, Aachen (D)
15:30 - 16:00
Coffee Break - Visit of the Sponsors' Exhibition
Micro Structuring
Raum BrüsselChairman: Martin Reininghaus, Fraunhofer ILT, Aachen (D)
14:00 - 14:30
High-tech Mastering for the Endless Structuring for Micro- and Nanofunctionalized Films
Dr. Tom Felbeck, temicon GmbH, Dortmund (D)
14:30 - 15:00
Machine Technology for Industrial Laser Micromachining
Dr. Jens Holtkamp, Pulsar Photonics GmbH, Herzogenrath (D)
15:00 - 15:30
New Perspectives in Micro Processing with GHz Ultrashort Pulse Lasers
Dr. Clemens Hönninger, Amplitude Laser Group, Pessac (F)
15:30 - 16:00
Coffee Break - Visit of the Sponsors' Exhibition
Micro Structuring
Raum BrüsselChairman: Martin Reininghaus, Fraunhofer ILT, Aachen (D)
14:00 - 14:30
High-tech Mastering for the Endless Structuring for Micro- and Nanofunctionalized Films
Dr. Tom Felbeck, temicon GmbH, Dortmund (D)
14:30 - 15:00
Machine Technology for Industrial Laser Micromachining
Dr. Jens Holtkamp, Pulsar Photonics GmbH, Herzogenrath (D)
15:00 - 15:30
New Perspectives in Micro Processing with GHz Ultrashort Pulse Lasers
Dr. Clemens Hönninger, Amplitude Laser Group, Pessac (F)
15:30 - 16:00
Coffee Break - Visit of the Sponsors' Exhibition
Solid State and Fiber Lasers
Raum K1Chairman: Hans-Dieter Hoffmann, Fraunhofer ILT, Aachen (D)
14:00 - 14:30
High Efficiency Converter Laser
Dr. Matthias Ackermann, Laserline GmbH, Mülheim-Kärlich (D)
14:30 - 15:00
High Average Power Ultrafast Lasers with High Flexibility for Materials Processing
Dr. Dirk Sutter, TRUMPF Laser GmbH, Schramberg (D)
15:00 - 15:30
Scalable Short Pulse Fiber Lasers
Michael Lee, IPG Laser GmbH, Burbach (D)
15:30 - 16:00
Coffee Break - Visit of the Sponsor's Exhibition
Solid State and Fiber Lasers
Raum K1Chairman: Hans-Dieter Hoffmann, Fraunhofer ILT, Aachen (D)
14:00 - 14:30
High Efficiency Converter Laser
Dr. Matthias Ackermann, Laserline GmbH, Mülheim-Kärlich (D)
14:30 - 15:00
High Average Power Ultrafast Lasers with High Flexibility for Materials Processing
Dr. Dirk Sutter, TRUMPF Laser GmbH, Schramberg (D)
15:00 - 15:30
Scalable Short Pulse Fiber Lasers
Michael Lee, IPG Laser GmbH, Burbach (D)
15:30 - 16:00
Coffee Break - Visit of the Sponsor's Exhibition
Laser Technology Live
Fraunhofer ILT16:30 - 19:30
Laser Technology Live
Laser Technology Live
Fraunhofer ILT16:30 - 19:30
Laser Technology Live
Networking at Eurogress Conference Center
20:00 - 23:00
Networking at Eurogress Conference Center
Networking at Eurogress Conference Center
20:00 - 23:00
Networking at Eurogress Conference Center
Perspectives for the Laser Source Development
Raum EuropaChairman: Prof. Constantin Häfner, Fraunhofer ILT, Aachen (D)
08:30 - 09:00
New Mission Areas for Photonics through Societal, Geospatial and Ecological Challenges
Prof. Constantin Häfner, Fraunhofer ILT, Aachen (D)
09:00 - 10:00
Perspectives for the Laser Source Development
Dr. Christian Schmitz, TRUMPF GmbH + Co. KG, Ditzingen (D)
Dr. Mark Sobey, Coherent Inc., Santa Clara (USA)
Volker Krause, Laserline GmbH, Mülheim-Kärlich (D)
10:00 - 10:40
Panel Discussion with the Speakers
10:40 - 11:15
Coffee Break - Visit of the sponsors' exhibition
Digitization in Photonic Production
Raum EuropaChairman: Prof. Constantin Häfner, Fraunhofer ILT, Aachen (D)
11:15 - 11:35
Digitization in Photonic Production
Dr. Joachim Döhner, KUKA Systems GmbH, Augsburg (D)
11:35 - 11:55
Next Generation of Data Driven Lasermachines - Much more than Cutting
Dr. Jens Ottnad, TRUMPF Werkzeugmaschinen SE + Co. KG, Ditzingen (D)
11:55 - 12:15
Additive Manufacturing - Digital and Smart
Dr. Tobias Kamps, Siemens AG, München (D)
12:15 - 12:30
Panel Discussion with the Speakers
12:30 - 14:00
Lunch - Visit of the Sponsors' Exhibition
Perspectives for the Laser Source Development
Raum EuropaChairman: Prof. Constantin Häfner, Fraunhofer ILT, Aachen (D)
08:30 - 09:00
New Mission Areas for Photonics through Societal, Geospatial and Ecological Challenges
Prof. Constantin Häfner, Fraunhofer ILT, Aachen (D)
09:00 - 10:00
Perspectives for the Laser Source Development
Dr. Christian Schmitz, TRUMPF GmbH + Co. KG, Ditzingen (D)
Dr. Mark Sobey, Coherent Inc., Santa Clara (USA)
Volker Krause, Laserline GmbH, Mülheim-Kärlich (D)
10:00 - 10:40
Panel Discussion with the Speakers
10:40 - 11:15
Coffee Break - Visit of the sponsors' exhibition
Digitization in Photonic Production
Raum EuropaChairman: Prof. Constantin Häfner, Fraunhofer ILT, Aachen (D)
11:15 - 11:35
Digitization in Photonic Production
Dr. Joachim Döhner, KUKA Systems GmbH, Augsburg (D)
11:35 - 11:55
Next Generation of Data Driven Lasermachines - Much more than Cutting
Dr. Jens Ottnad, TRUMPF Werkzeugmaschinen SE + Co. KG, Ditzingen (D)
11:55 - 12:15
Additive Manufacturing - Digital and Smart
Dr. Tobias Kamps, Siemens AG, München (D)
12:15 - 12:30
Panel Discussion with the Speakers
12:30 - 14:00
Lunch - Visit of the Sponsors' Exhibition
Cutting
Raum EuropaChairman: Dr. Dirk Petring, Fraunhofer ILT, Aachen (D)
08:30 - 09:00
Enhancing Cutting Performance with an Oscillating Laser Beam
Takaaki Yamanashi, AMADA Co. Ltd, Kanagawa (JP)
09:00 - 09:30
Higher Power - Higher Performance?
Prof. John Powell, Lulea University of Technology, Lulea (SE) / Laser Expertise Ltd., Nottingham (UK)
09:30 - 10:00
Use of Acoustic Resonances in Laser Beam Cutting - The Cutting Whistle
Marcelo de Oliveira Lopes, RWTH Aachen University - LLT, Aachen (D)
10:00 - 11:00
Coffee Break - Visit of the sponsors' exhibition
Laser Welding
Raum EuropaChairman: Dr. Dirk Petring, Fraunhofer ILT, Aachen (D)
11:00 - 11:30
Laser Beam Welding in Vacuum - Industrial Implementations by LaVa-X
Dr. Christian Otten, LaVa-X GmbH, Herzogenrath (D)
11:30 - 12:00
Welding of Thick Metal Plates with Laser - Where are the Limits?
Prof. Michael Rethmeier, Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin (D)
12:00 - 12:30
MultiPROmobil - Digital Twin meets Multifunctional Laser Robot
Martin Dahmen, Fraunhofer ILT, Aachen (D)
12:30 - 14:30
Lunch - Visit of the Sponsors' Exhibition
Laser Material Deposition
Raum EuropaChairman: Dr. Thomas Schopphoven, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Requirements for Brake Disc Coatings from an OEM Perspective
Dr. Sebastian Gramstat, Audi AG, Ingolstadt (D)
15:00 - 15:30
Coaxial Laser Arc Hybrid LMD with Wire for Additive Manufacturing
Max Fabian Steiner, Fraunhofer ILT, Aachen (D)
15:30 - 16:00
Automation of Hybrid-Additive Process Chains with Adaptive Processes
Jan Bremer, BCT Steuerungs- und DV-Systeme GmbH, Dortmund (D)
Cutting
Raum EuropaChairman: Dr. Dirk Petring, Fraunhofer ILT, Aachen (D)
08:30 - 09:00
Enhancing Cutting Performance with an Oscillating Laser Beam
Takaaki Yamanashi, AMADA Co. Ltd, Kanagawa (JP)
09:00 - 09:30
Higher Power - Higher Performance?
Prof. John Powell, Lulea University of Technology, Lulea (SE) / Laser Expertise Ltd., Nottingham (UK)
09:30 - 10:00
Use of Acoustic Resonances in Laser Beam Cutting - The Cutting Whistle
Marcelo de Oliveira Lopes, RWTH Aachen University - LLT, Aachen (D)
10:00 - 11:00
Coffee Break - Visit of the sponsors' exhibition
Laser Welding
Raum EuropaChairman: Dr. Dirk Petring, Fraunhofer ILT, Aachen (D)
11:00 - 11:30
Laser Beam Welding in Vacuum - Industrial Implementations by LaVa-X
Dr. Christian Otten, LaVa-X GmbH, Herzogenrath (D)
11:30 - 12:00
Welding of Thick Metal Plates with Laser - Where are the Limits?
Prof. Michael Rethmeier, Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin (D)
12:00 - 12:30
MultiPROmobil - Digital Twin meets Multifunctional Laser Robot
Martin Dahmen, Fraunhofer ILT, Aachen (D)
12:30 - 14:30
Lunch - Visit of the Sponsors' Exhibition
Laser Material Deposition
Raum EuropaChairman: Dr. Thomas Schopphoven, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Requirements for Brake Disc Coatings from an OEM Perspective
Dr. Sebastian Gramstat, Audi AG, Ingolstadt (D)
15:00 - 15:30
Coaxial Laser Arc Hybrid LMD with Wire for Additive Manufacturing
Max Fabian Steiner, Fraunhofer ILT, Aachen (D)
15:30 - 16:00
Automation of Hybrid-Additive Process Chains with Adaptive Processes
Jan Bremer, BCT Steuerungs- und DV-Systeme GmbH, Dortmund (D)
Micro Joining
Raum BrüsselChairman: Dr. Alexander Olowinsky, Fraunhofer ILT, Aachen (D)
08:30 - 09:00
Micro Welding with Temporal and Spatial Beam Modulation
Dr. André Häusler, Fraunhofer ILT, Aachen (D)
09:00 - 09:30
Laser Micro Welding of Novel Type of Hermetic Lids for Energy Storage Devices
Georg Haselhorst, SCHOTT AG, Mainz (D)
09:30 - 10:00
Flexible Use of Laser Beam Technology for E-Mobility
Dr. Jan-Philipp Weberpals, Subject Specialist Laser Beam Processes for Car Body Construction and Electromobility, Audi AG, Neckarsulm (D)
10:00 - 11:00
Coffee Break - Visit of the Sponsors' Exhibition
Ultrafast Lasers - Applications
Raum BrüsselChairman: Prof. Arnold Gillner, Fraunhofer ILT, Aachen (D)
11:00 - 11:30
Digitization for Highly Accurate 3D Laser Processing of Customer-Specific Tool
Dr. Claus Dold, Fritz Studer AG - EWAG Zweigniederlassung, Etziken (CH)
11:30 - 12:00
Ultrashort Pulsed Laser Processing for Sustainable Applications
Dr. Karsten Lange, Fraunhofer ILT, Aachen (D)
12:00 - 12:30
Next Level Laser Processes for Gasturbine Manufacturing
Marcel Vollgold, Siemens Energy Global GmbH & Co. KG, Berlin (D)
12:30 - 14:30
Lunch - Visit of the Sponsors' Exhibition
Polishing and Thin Film Processing
Raum BrüsselChairman: Dr. Edgar Willenborg, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Fully Digitalized Production Chain with Laser Ablation and Laser Polishing for the Manufacturing of Interocular Lenses
Prof. Reinhart Poprawe, ETERNATECH GmbH, Aachen (D)
15:00 - 15:30
Laser Sintering of Solid-State Battery Layers
Dr. Ralph Delmdahl, Coherent LaserSystems GmbH & Co. KG, Göttingen (D)
15:30 - 16:00
Smart Products through Functional Layers
Dr. Christian Vedder, Fraunhofer ILT, Aachen (D)
Micro Joining
Raum BrüsselChairman: Dr. Alexander Olowinsky, Fraunhofer ILT, Aachen (D)
08:30 - 09:00
Micro Welding with Temporal and Spatial Beam Modulation
Dr. André Häusler, Fraunhofer ILT, Aachen (D)
09:00 - 09:30
Laser Micro Welding of Novel Type of Hermetic Lids for Energy Storage Devices
Georg Haselhorst, SCHOTT AG, Mainz (D)
09:30 - 10:00
Flexible Use of Laser Beam Technology for E-Mobility
Dr. Jan-Philipp Weberpals, Subject Specialist Laser Beam Processes for Car Body Construction and Electromobility, Audi AG, Neckarsulm (D)
10:00 - 11:00
Coffee Break - Visit of the Sponsors' Exhibition
Ultrafast Lasers - Applications
Raum BrüsselChairman: Prof. Arnold Gillner, Fraunhofer ILT, Aachen (D)
11:00 - 11:30
Digitization for Highly Accurate 3D Laser Processing of Customer-Specific Tool
Dr. Claus Dold, Fritz Studer AG - EWAG Zweigniederlassung, Etziken (CH)
11:30 - 12:00
Ultrashort Pulsed Laser Processing for Sustainable Applications
Dr. Karsten Lange, Fraunhofer ILT, Aachen (D)
12:00 - 12:30
Next Level Laser Processes for Gasturbine Manufacturing
Marcel Vollgold, Siemens Energy Global GmbH & Co. KG, Berlin (D)
12:30 - 14:30
Lunch - Visit of the Sponsors' Exhibition
Polishing and Thin Film Processing
Raum BrüsselChairman: Dr. Edgar Willenborg, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Fully Digitalized Production Chain with Laser Ablation and Laser Polishing for the Manufacturing of Interocular Lenses
Prof. Reinhart Poprawe, ETERNATECH GmbH, Aachen (D)
15:00 - 15:30
Laser Sintering of Solid-State Battery Layers
Dr. Ralph Delmdahl, Coherent LaserSystems GmbH & Co. KG, Göttingen (D)
15:30 - 16:00
Smart Products through Functional Layers
Dr. Christian Vedder, Fraunhofer ILT, Aachen (D)
Ultrafast Lasers - Beam Sources
Raum K1Chairman: Dr. Peter Rußbüldt, Fraunhofer ILT, Aachen (D)
08:30 - 09:00
Advanced Photon Sources - Extending the Parameter Range of Ultrafast Lasers
Hans-Dieter Hoffmann, Fraunhofer ILT, Aachen (D)
09:00 - 09:30
High Energy Ultrashort Pulsed Laser Sources at 2 µm and Beyond - Results from the NUCLEUS Project
Dr. Maik Frede, neoLASE GmbH, Hannover (D)
09:30 - 10:00
Ultrafast Thin-Disk Amplifiers
Dr. Thomas Metzger, TRUMPF Scientific Lasers GmbH + Co. KG, München (D)
10:00 - 11:00
Kaffeepause - Besuch der Sponsorenausstellung
Lasers with Tailored Wavelengths
Raum K1Chairman: Dr. Bernd Jungbluth, Fraunhofer ILT, Aachen (D)
11:00 - 11:30
Green High-Power Disk Lasers and Industrial Applications
Dr. Evangelos Papastathopoulos, TRUMPF Laser AG, Schramberg (D)
11:30 - 12:00
Mid-Infrared Short and Ultrashort Pulsed Lasers for Materials Processing
Dr. Sebastian Nyga, Fraunhofer ILT, Aachen (D)
12:00 - 12:30
2 µm Fiber Laser for Industrial Use
Dr. Peter Fuhrberg, Futonics Laser GmbH, Göttingen (D)
12:30 - 14:30
Lunch - Visit of the Sponsors' Exhibition
Diodenlaser
Raum K1Chairman: Dr. Martin Traub, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Blue and Infrared High Power Laser Diodes for Material Processing
Dr. Harald König, ams-OSRAM International GmbH, Regensburg (D)
15:00 - 15:30
Efficient High Brightness and High Power Laser Diode Bars operated on Passively Cooled Heat-Sinks
Dr. Ralf Hülsewede, JENOPTIK Optical Systems GmbH, Berlin (D)
15:30 - 16:00
VCSEL for 3D Sensing and LIDAR Applications
Dr. Holger Mönch, TRUMPF Photonic Components GmbH, Ulm (D)
Ultrafast Lasers - Beam Sources
Raum K1Chairman: Dr. Peter Rußbüldt, Fraunhofer ILT, Aachen (D)
08:30 - 09:00
Advanced Photon Sources - Extending the Parameter Range of Ultrafast Lasers
Hans-Dieter Hoffmann, Fraunhofer ILT, Aachen (D)
09:00 - 09:30
High Energy Ultrashort Pulsed Laser Sources at 2 µm and Beyond - Results from the NUCLEUS Project
Dr. Maik Frede, neoLASE GmbH, Hannover (D)
09:30 - 10:00
Ultrafast Thin-Disk Amplifiers
Dr. Thomas Metzger, TRUMPF Scientific Lasers GmbH + Co. KG, München (D)
10:00 - 11:00
Kaffeepause - Besuch der Sponsorenausstellung
Lasers with Tailored Wavelengths
Raum K1Chairman: Dr. Bernd Jungbluth, Fraunhofer ILT, Aachen (D)
11:00 - 11:30
Green High-Power Disk Lasers and Industrial Applications
Dr. Evangelos Papastathopoulos, TRUMPF Laser AG, Schramberg (D)
11:30 - 12:00
Mid-Infrared Short and Ultrashort Pulsed Lasers for Materials Processing
Dr. Sebastian Nyga, Fraunhofer ILT, Aachen (D)
12:00 - 12:30
2 µm Fiber Laser for Industrial Use
Dr. Peter Fuhrberg, Futonics Laser GmbH, Göttingen (D)
12:30 - 14:30
Lunch - Visit of the Sponsors' Exhibition
Diodenlaser
Raum K1Chairman: Dr. Martin Traub, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Blue and Infrared High Power Laser Diodes for Material Processing
Dr. Harald König, ams-OSRAM International GmbH, Regensburg (D)
15:00 - 15:30
Efficient High Brightness and High Power Laser Diode Bars operated on Passively Cooled Heat-Sinks
Dr. Ralf Hülsewede, JENOPTIK Optical Systems GmbH, Berlin (D)
15:30 - 16:00
VCSEL for 3D Sensing and LIDAR Applications
Dr. Holger Mönch, TRUMPF Photonic Components GmbH, Ulm (D)
New Business Areas with Laser Technology - Gas Leak Detection with Helicopter based LIDAR Systems
Raum Europa16:00 - 16:30
Outlook
Matthias Ulbricht, ADLARES GmbH, Teltow (D)
New Business Areas with Laser Technology - Gas Leak Detection with Helicopter based LIDAR Systems
Raum Europa16:00 - 16:30
Outlook
Matthias Ulbricht, ADLARES GmbH, Teltow (D)
Eurogress Aachen
Monheimsallee 48
52062 Aachen
Germany
Eurogress Aachen
Monheimsallee 48
52062 Aachen
Germany
Eurogress Aachen
Monheimsallee 48
52062 Aachen
Germany
Eurogress Aachen
Monheimsallee 48
52062 Aachen
Germany
Eurogress Aachen
Monheimsallee 48
52062 Aachen
Germany
Eurogress Aachen
Monheimsallee 48
52062 Aachen
Germany
Eurogress Aachen
Monheimsallee 48
52062 Aachen
Germany
Rathaus Aachen
Markt
52062 Aachen
NRW , Germany
City Hall
Markt
52062 Aachen
Germany
Eurogress Aachen
Monheimsallee 48
52062 Aachen
Germany
Fraunhofer ILT
Steinbachstraße 15
52074 Aachen
Germany
Please note: Subject to change without notice.
The Innovation Award Laser Technology is a European research prize awarded at 2-yearly intervals by the association Arbeitskreis Lasertechnik e.V. and the European Laser Institute ELI.
