Solid State and Fiber Lasers
Room LissabonChairman: Hans-Dieter Hoffmann, Fraunhofer ILT, Aachen (D)
14:00 - 14:30
Solid-State and Fiber Lasers for Industrial Use: Status & Prospects
Hans-Dieter Hoffmann, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Multi-Core Fiber Lasers with High Performance and High Efficiency
Andreas Siewert, IPG Laser GmbH, Burbach (D)
15:00 - 15:30
Short- and Ultrashort Pulsed InnoSlab Lasers in Selected Industrial Applications
Dr. Keming Du, EdgeWave GmbH, Würselen (D)
15:30 - 16:00
Coffee Break - Visit of the Sponsors' Exhibition
Ultrafast Lasers - Laser Beam Sources
Room LissabonChairman: Dr. Peter Rußbüldt, Fraunhofer ILT, Aachen (D)
08:30 - 10:00
Ultrafast Lasers - Laser Beam Sources
Lasers with Tailored Wavelengths
Room LissabonChairman: Dr. Bernd Jungbluth, Fraunhofer ILT, Aachen (D)
11:00 - 11:30
High-Power Lasers with Application-Specific Pulse Length and Wavelengths in UV, VIS and NIR
Dr. Roland Mayerhofer, ROFIN-BAASEL Lasertech GmbH & Co. KG, Starnberg (D)
11:30 - 12:00
Cutting Edge Fiber Laser Technology around 2 µm
Dr. Shibin Jiang, AdValue Photonics Inc., Tucson (USA)
12:00 - 12:30
Architecture, Performance and Application of High-Power High Repetition Rate UV Laser with Flexible Pulse Control
Dr. Rajesh S. Patel, Spectra-Physics, Santa Clara (USA)
12:30 - 14:30
Lunch - Visit of the Sponsors' Exhibition
Diode Lasers
Room LissabonChairman: Dr. Martin Traub, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Development of Performance and Efficiency of High Power Diode Lasers
Volker Krause, Laserline GmbH, Mülheim-Kärlich (D)
15:00 - 15:30
Recent Results and Future Scaling Potential of the T-Bar Design
Dr. Jens Biesenbach, DILAS Diodenlaser GmbH, Mainz-Hechtsheim (D)
15:30 - 16:00
Laser Scanner - A Crucial Step towards Automated Driving
Dr. Gunnar Busse, Valeo Schalter und Sensoren GmbH, Bietigheim-Bissingen (D)
Forum Process Control
Room K2Chairman: Peter Abels, Fraunhofer ILT, Aachen (D)
10:30 - 11:00
Advantages of Online Beam Monitoring during Laser Production - Monitoring the Tool rather than the Result
Dr. Reinhard Kramer, PRIMES GmbH, Pfungstadt (D)
11:00 - 11:30
Closed Loop Control of Deep Penetration Welding and Further Potential of Low Coherence Interferometry
Dr. Markus Kogel-Hollacher, Precitec Optronik GmbH, Neu-Isenburg (D)
11:30 - 12:00
Process Monitoring in Automotive Production - Challenges and Benefits
Christoph Franz
14:00 - 14:30
In-Situ Sensor Concept to Ensure the Process Quality for Laser Beam Remote Welding of Aluminum
Dr. Jan-Philipp Weberpals, Subject Specialist Laser Beam Processes for Car Body Construction and Electromobility, Audi AG, Neckarsulm (D)
14:30 - 15:00
Process Control in Industrial Applications
Wouter Zweers, AWL-Techniek B.V., Harderwijk (NL)
15:00 - 15:30
Uncooled High Speed Mid Infrared Cameras for Process Monitoring of Laser Welding
Dr. Germán Vergara Ogando, New Infrared Technologies, Ltd., Madrid (ES)
15:30 - 16:30
Coffee Break - Visit of the Sponsors' Exhibition
16:30 - 17:00
Active Thermography for Quality Control of Laser Welded Metals and Laser Processed Fiber Reinforced Plastic Materials
Dr. Christian Srajbr, edevis GmbH, Stuttgart (D)
17:00 - 17:30
Process Monitoring while Welding of Cu Components in Electronics Manufacturing
Dr. Jens Gedicke, Hella KGaA Hueck & Co., Hamm (D)
Forum Laser Additive Manufacturing
Room K1Chairman: Prof. Sebastian Bremen, Fraunhofer ILT, Aachen (D)
14:00 - 14:30
High Speed Laser Metal Deposition of Large Rods for Wear and Corrosion Applications
Ernst Dijkstra, TOPCLAD B.V., Lelystad (NL)
14:30 - 15:00
Hybrid Manufacturing of Turbine Components via Laser Metal Deposition and Adaptive Repair
Volker Böhm, HAMUEL Maschinenbau GmbH & Co. KG, Meeder (D)
15:00 - 16:30
Manufacturing of Large Components for the Aviation Using LMD
Prof. Xin Lin, Northwestern Polytechnical University, Xi'an, Shaanxi (CN)
16:30 - 17:00
Exploring New Frontiers in Metals Additive Manufacturing: From Electron Beams to Lasers
Jorge Mireles, University of Texas, El Paso (USA)
17:00 - 17:30
New to the LAM Community? Networking Helps Along! Presentation of the Aachen Networks ACAM and ICTM
Dr. Johannes Witzel, Fraunhofer ILT, Aachen (D)
Torsten Moll, Fraunhofer IPT, Aachen (D)
Micro Structuring
Room BrüsselChairman: Christian Fornaroli, Fraunhofer ILT, Aachen (D)
14:00 - 14:30
Process Analytics of Laser Ablation Processes
Prof. Arnold Gillner, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Importance of Micro Structure to Improve the Molding Process in Terms of Speed and Quality
Jean-Jose Paccaud, GF Machining Solutions, Meyrin (CH)
15:00 - 15:30
Laser Filamentation of Glass and Other Transparent, Brittle Materials: Fundamentals, Laser Concepts and Applications
Dr. Roland Mayerhofer, ROFIN-BAASEL Lasertech GmbH & Co. KG, Starnberg (D)
15:30 - 16:00
Coffee Break - Visit of the Sponsors' Exhibition
Micro Joining
Room BrüsselChairman: Dr. Alexander Olowinsky, Fraunhofer ILT, Aachen (D)
08:30 - 10:00
Micro Joining
Ultrafast Lasers - Applications
Room BrüsselChairman: Prof. Arnold Gillner, Fraunhofer ILT, Aachen (D)
11:00 - 11:30
High Power Ultrashort Pulsed Lasers in Tool Technology - Productive Processes for Microstructures on Macro Components
Christian Fornaroli, Fraunhofer ILT, Aachen (D)
11:30 - 12:00
Lasers in the Production of Circuit Substrates
Dr. Malte Schulz-Ruhtenberg, LPKF Laser & Electronics AG, Garbsen (D)
12:00 - 12:30
Present Status and Trends of Femtosecond Laser Processing in Next Generation Displays, AMOLED Manufacturing Industry
Prof. Sung-Hak Cho, KIMM Korea Institute of Machinery & Material, Daejeon (KR)
Polishing and Thin Film Processing
Room BrüsselChairman: Dr. Jochen Stollenwerk, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Laser-based Production of Thin Films for Electronic Applications
Dr. Christian Vedder, Fraunhofer ILT, Aachen (D)
15:00 - 15:30
Q-switched CO2 Laser Opens New Opportunities in Laser Material Processing
Hendrik Steinmetz, FEHA LaserTec GmbH, Bitterfeld-Wolfen (D)
15:30 - 16:00
Adapted Intensity Distribution by Free-Form Optics for Laser Surface Treatment
Rainer Klar, INNOLITE GmbH, Aachen (D)
Laser Technology Live
Fraunhofer ILT16:00 - 16:30
Shuttle Transfer to Fraunhofer ILT
16:30 - 19:30
Laser Technology Live
Outlook
Room BerlinChairman: Prof. Reinhart Poprawe, Fraunhofer ILT, Aachen (D)
16:00 - 16:30
Outlook
Prof. Reinhart Poprawe, Fraunhofer ILT, Aachen (D)
Sponsorenausstellung
Foyer Brüssel12:00 - 17:00
Sponsorenausstellung
Sponsors' Exhibition
Foyer Brüssel10:30 - 16:00
Sponsors' Exhibition
Forum Process Control
Room K2Chairman: Peter Abels, Fraunhofer ILT, Aachen (D)
10:30 - 11:00
Advantages of Online Beam Monitoring during Laser Production - Monitoring the Tool rather than the Result
Dr. Reinhard Kramer, PRIMES GmbH, Pfungstadt (D)
11:00 - 11:30
Closed Loop Control of Deep Penetration Welding and Further Potential of Low Coherence Interferometry
Dr. Markus Kogel-Hollacher, Precitec Optronik GmbH, Neu-Isenburg (D)
11:30 - 12:00
Process Monitoring in Automotive Production - Challenges and Benefits
Christoph Franz
14:00 - 14:30
In-Situ Sensor Concept to Ensure the Process Quality for Laser Beam Remote Welding of Aluminum
Dr. Jan-Philipp Weberpals, Subject Specialist Laser Beam Processes for Car Body Construction and Electromobility, Audi AG, Neckarsulm (D)
14:30 - 15:00
Process Control in Industrial Applications
Wouter Zweers, AWL-Techniek B.V., Harderwijk (NL)
15:00 - 15:30
Uncooled High Speed Mid Infrared Cameras for Process Monitoring of Laser Welding
Dr. Germán Vergara Ogando, New Infrared Technologies, Ltd., Madrid (ES)
15:30 - 16:30
Coffee Break - Visit of the Sponsors' Exhibition
16:30 - 17:00
Active Thermography for Quality Control of Laser Welded Metals and Laser Processed Fiber Reinforced Plastic Materials
Dr. Christian Srajbr, edevis GmbH, Stuttgart (D)
17:00 - 17:30
Process Monitoring while Welding of Cu Components in Electronics Manufacturing
Dr. Jens Gedicke, Hella KGaA Hueck & Co., Hamm (D)
Forum Process Control
Room K2Chairman: Peter Abels, Fraunhofer ILT, Aachen (D)
10:30 - 11:00
Advantages of Online Beam Monitoring during Laser Production - Monitoring the Tool rather than the Result
Dr. Reinhard Kramer, PRIMES GmbH, Pfungstadt (D)
11:00 - 11:30
Closed Loop Control of Deep Penetration Welding and Further Potential of Low Coherence Interferometry
Dr. Markus Kogel-Hollacher, Precitec Optronik GmbH, Neu-Isenburg (D)
11:30 - 12:00
Process Monitoring in Automotive Production - Challenges and Benefits
Christoph Franz
14:00 - 14:30
In-Situ Sensor Concept to Ensure the Process Quality for Laser Beam Remote Welding of Aluminum
Dr. Jan-Philipp Weberpals, Subject Specialist Laser Beam Processes for Car Body Construction and Electromobility, Audi AG, Neckarsulm (D)
14:30 - 15:00
Process Control in Industrial Applications
Wouter Zweers, AWL-Techniek B.V., Harderwijk (NL)
15:00 - 15:30
Uncooled High Speed Mid Infrared Cameras for Process Monitoring of Laser Welding
Dr. Germán Vergara Ogando, New Infrared Technologies, Ltd., Madrid (ES)
15:30 - 16:30
Coffee Break - Visit of the Sponsors' Exhibition
16:30 - 17:00
Active Thermography for Quality Control of Laser Welded Metals and Laser Processed Fiber Reinforced Plastic Materials
Dr. Christian Srajbr, edevis GmbH, Stuttgart (D)
17:00 - 17:30
Process Monitoring while Welding of Cu Components in Electronics Manufacturing
Dr. Jens Gedicke, Hella KGaA Hueck & Co., Hamm (D)
Sponsorenausstellung
Foyer Brüssel12:00 - 17:00
Sponsorenausstellung
Sponsors' Exhibition
Foyer Brüssel12:00 - 17:00
Sponsors' Exhibition
Sponsorenausstellung
Foyer Brüssel12:00 - 17:00
Sponsorenausstellung
Forum Laser Additive Manufacturing
Room K1Chairman: Prof. Sebastian Bremen, Fraunhofer ILT, Aachen (D)
14:00 - 14:30
High Speed Laser Metal Deposition of Large Rods for Wear and Corrosion Applications
Ernst Dijkstra, TOPCLAD B.V., Lelystad (NL)
14:30 - 15:00
Hybrid Manufacturing of Turbine Components via Laser Metal Deposition and Adaptive Repair
Volker Böhm, HAMUEL Maschinenbau GmbH & Co. KG, Meeder (D)
15:00 - 16:30
Manufacturing of Large Components for the Aviation Using LMD
Prof. Xin Lin, Northwestern Polytechnical University, Xi'an, Shaanxi (CN)
16:30 - 17:00
Exploring New Frontiers in Metals Additive Manufacturing: From Electron Beams to Lasers
Jorge Mireles, University of Texas, El Paso (USA)
17:00 - 17:30
New to the LAM Community? Networking Helps Along! Presentation of the Aachen Networks ACAM and ICTM
Dr. Johannes Witzel, Fraunhofer ILT, Aachen (D)
Torsten Moll, Fraunhofer IPT, Aachen (D)
Forum Laser Additive Manufacturing
Room K1Chairman: Prof. Sebastian Bremen, Fraunhofer ILT, Aachen (D)
14:00 - 14:30
High Speed Laser Metal Deposition of Large Rods for Wear and Corrosion Applications
Ernst Dijkstra, TOPCLAD B.V., Lelystad (NL)
14:30 - 15:00
Hybrid Manufacturing of Turbine Components via Laser Metal Deposition and Adaptive Repair
Volker Böhm, HAMUEL Maschinenbau GmbH & Co. KG, Meeder (D)
15:00 - 16:30
Manufacturing of Large Components for the Aviation Using LMD
Prof. Xin Lin, Northwestern Polytechnical University, Xi'an, Shaanxi (CN)
16:30 - 17:00
Exploring New Frontiers in Metals Additive Manufacturing: From Electron Beams to Lasers
Jorge Mireles, University of Texas, El Paso (USA)
17:00 - 17:30
New to the LAM Community? Networking Helps Along! Presentation of the Aachen Networks ACAM and ICTM
Dr. Johannes Witzel, Fraunhofer ILT, Aachen (D)
Torsten Moll, Fraunhofer IPT, Aachen (D)
Sponsors' Exhibition
Foyer Brüssel10:30 - 16:00
Sponsors' Exhibition
Sponsors' Exhibition
Foyer Brüssel10:30 - 16:00
Sponsors' Exhibition
Sponsorenausstellung
Foyer Brüssel / Europa12:00 - 18:00
Sponsorenausstellung
Laser Technology Live
Fraunhofer ILT16:00 - 16:30
Shuttle Transfer to Fraunhofer ILT
16:30 - 19:30
Laser Technology Live
Laser Technology Live
Fraunhofer ILT16:00 - 16:30
Shuttle Transfer to Fraunhofer ILT
16:30 - 19:30
Laser Technology Live
Micro Structuring
Room BrüsselChairman: Christian Fornaroli, Fraunhofer ILT, Aachen (D)
14:00 - 14:30
Process Analytics of Laser Ablation Processes
Prof. Arnold Gillner, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Importance of Micro Structure to Improve the Molding Process in Terms of Speed and Quality
Jean-Jose Paccaud, GF Machining Solutions, Meyrin (CH)
15:00 - 15:30
Laser Filamentation of Glass and Other Transparent, Brittle Materials: Fundamentals, Laser Concepts and Applications
Dr. Roland Mayerhofer, ROFIN-BAASEL Lasertech GmbH & Co. KG, Starnberg (D)
15:30 - 16:00
Coffee Break - Visit of the Sponsors' Exhibition
Micro Structuring
Room BrüsselChairman: Christian Fornaroli, Fraunhofer ILT, Aachen (D)
14:00 - 14:30
Process Analytics of Laser Ablation Processes
Prof. Arnold Gillner, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Importance of Micro Structure to Improve the Molding Process in Terms of Speed and Quality
Jean-Jose Paccaud, GF Machining Solutions, Meyrin (CH)
15:00 - 15:30
Laser Filamentation of Glass and Other Transparent, Brittle Materials: Fundamentals, Laser Concepts and Applications
Dr. Roland Mayerhofer, ROFIN-BAASEL Lasertech GmbH & Co. KG, Starnberg (D)
15:30 - 16:00
Coffee Break - Visit of the Sponsors' Exhibition
Solid State and Fiber Lasers
Room LissabonChairman: Hans-Dieter Hoffmann, Fraunhofer ILT, Aachen (D)
14:00 - 14:30
Solid-State and Fiber Lasers for Industrial Use: Status & Prospects
Hans-Dieter Hoffmann, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Multi-Core Fiber Lasers with High Performance and High Efficiency
Andreas Siewert, IPG Laser GmbH, Burbach (D)
15:00 - 15:30
Short- and Ultrashort Pulsed InnoSlab Lasers in Selected Industrial Applications
Dr. Keming Du, EdgeWave GmbH, Würselen (D)
15:30 - 16:00
Coffee Break - Visit of the Sponsors' Exhibition
Solid State and Fiber Lasers
Room LissabonChairman: Hans-Dieter Hoffmann, Fraunhofer ILT, Aachen (D)
14:00 - 14:30
Solid-State and Fiber Lasers for Industrial Use: Status & Prospects
Hans-Dieter Hoffmann, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Multi-Core Fiber Lasers with High Performance and High Efficiency
Andreas Siewert, IPG Laser GmbH, Burbach (D)
15:00 - 15:30
Short- and Ultrashort Pulsed InnoSlab Lasers in Selected Industrial Applications
Dr. Keming Du, EdgeWave GmbH, Würselen (D)
15:30 - 16:00
Coffee Break - Visit of the Sponsors' Exhibition
Sponsors' Exhibition
Foyer Brüssel10:00 - 16:00
Sponsors' Exhibition
Sponsors' Exhibition
Foyer Brüssel10:00 - 16:00
Sponsors' Exhibition
Micro Joining
Room BrüsselChairman: Dr. Alexander Olowinsky, Fraunhofer ILT, Aachen (D)
08:30 - 10:00
Micro Joining
Ultrafast Lasers - Applications
Room BrüsselChairman: Prof. Arnold Gillner, Fraunhofer ILT, Aachen (D)
11:00 - 11:30
High Power Ultrashort Pulsed Lasers in Tool Technology - Productive Processes for Microstructures on Macro Components
Christian Fornaroli, Fraunhofer ILT, Aachen (D)
11:30 - 12:00
Lasers in the Production of Circuit Substrates
Dr. Malte Schulz-Ruhtenberg, LPKF Laser & Electronics AG, Garbsen (D)
12:00 - 12:30
Present Status and Trends of Femtosecond Laser Processing in Next Generation Displays, AMOLED Manufacturing Industry
Prof. Sung-Hak Cho, KIMM Korea Institute of Machinery & Material, Daejeon (KR)
Polishing and Thin Film Processing
Room BrüsselChairman: Dr. Jochen Stollenwerk, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Laser-based Production of Thin Films for Electronic Applications
Dr. Christian Vedder, Fraunhofer ILT, Aachen (D)
15:00 - 15:30
Q-switched CO2 Laser Opens New Opportunities in Laser Material Processing
Hendrik Steinmetz, FEHA LaserTec GmbH, Bitterfeld-Wolfen (D)
15:30 - 16:00
Adapted Intensity Distribution by Free-Form Optics for Laser Surface Treatment
Rainer Klar, INNOLITE GmbH, Aachen (D)
Micro Joining
Room BrüsselChairman: Dr. Alexander Olowinsky, Fraunhofer ILT, Aachen (D)
08:30 - 10:00
Micro Joining
Polishing and Thin Film Processing
Room BrüsselChairman: Dr. Jochen Stollenwerk, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Laser-based Production of Thin Films for Electronic Applications
Dr. Christian Vedder, Fraunhofer ILT, Aachen (D)
15:00 - 15:30
Q-switched CO2 Laser Opens New Opportunities in Laser Material Processing
Hendrik Steinmetz, FEHA LaserTec GmbH, Bitterfeld-Wolfen (D)
15:30 - 16:00
Adapted Intensity Distribution by Free-Form Optics for Laser Surface Treatment
Rainer Klar, INNOLITE GmbH, Aachen (D)
Ultrafast Lasers - Applications
Room BrüsselChairman: Prof. Arnold Gillner, Fraunhofer ILT, Aachen (D)
11:00 - 11:30
High Power Ultrashort Pulsed Lasers in Tool Technology - Productive Processes for Microstructures on Macro Components
Christian Fornaroli, Fraunhofer ILT, Aachen (D)
11:30 - 12:00
Lasers in the Production of Circuit Substrates
Dr. Malte Schulz-Ruhtenberg, LPKF Laser & Electronics AG, Garbsen (D)
12:00 - 12:30
Present Status and Trends of Femtosecond Laser Processing in Next Generation Displays, AMOLED Manufacturing Industry
Prof. Sung-Hak Cho, KIMM Korea Institute of Machinery & Material, Daejeon (KR)
Ultrafast Lasers - Laser Beam Sources
Room LissabonChairman: Dr. Peter Rußbüldt, Fraunhofer ILT, Aachen (D)
08:30 - 10:00
Ultrafast Lasers - Laser Beam Sources
Lasers with Tailored Wavelengths
Room LissabonChairman: Dr. Bernd Jungbluth, Fraunhofer ILT, Aachen (D)
11:00 - 11:30
High-Power Lasers with Application-Specific Pulse Length and Wavelengths in UV, VIS and NIR
Dr. Roland Mayerhofer, ROFIN-BAASEL Lasertech GmbH & Co. KG, Starnberg (D)
11:30 - 12:00
Cutting Edge Fiber Laser Technology around 2 µm
Dr. Shibin Jiang, AdValue Photonics Inc., Tucson (USA)
12:00 - 12:30
Architecture, Performance and Application of High-Power High Repetition Rate UV Laser with Flexible Pulse Control
Dr. Rajesh S. Patel, Spectra-Physics, Santa Clara (USA)
12:30 - 14:30
Lunch - Visit of the Sponsors' Exhibition
Diode Lasers
Room LissabonChairman: Dr. Martin Traub, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Development of Performance and Efficiency of High Power Diode Lasers
Volker Krause, Laserline GmbH, Mülheim-Kärlich (D)
15:00 - 15:30
Recent Results and Future Scaling Potential of the T-Bar Design
Dr. Jens Biesenbach, DILAS Diodenlaser GmbH, Mainz-Hechtsheim (D)
15:30 - 16:00
Laser Scanner - A Crucial Step towards Automated Driving
Dr. Gunnar Busse, Valeo Schalter und Sensoren GmbH, Bietigheim-Bissingen (D)
Ultrafast Lasers - Laser Beam Sources
Room LissabonChairman: Dr. Peter Rußbüldt, Fraunhofer ILT, Aachen (D)
08:30 - 10:00
Ultrafast Lasers - Laser Beam Sources
Lasers with Tailored Wavelengths
Room LissabonChairman: Dr. Bernd Jungbluth, Fraunhofer ILT, Aachen (D)
11:00 - 11:30
High-Power Lasers with Application-Specific Pulse Length and Wavelengths in UV, VIS and NIR
Dr. Roland Mayerhofer, ROFIN-BAASEL Lasertech GmbH & Co. KG, Starnberg (D)
11:30 - 12:00
Cutting Edge Fiber Laser Technology around 2 µm
Dr. Shibin Jiang, AdValue Photonics Inc., Tucson (USA)
12:00 - 12:30
Architecture, Performance and Application of High-Power High Repetition Rate UV Laser with Flexible Pulse Control
Dr. Rajesh S. Patel, Spectra-Physics, Santa Clara (USA)
12:30 - 14:30
Lunch - Visit of the Sponsors' Exhibition
Diode Lasers
Room LissabonChairman: Dr. Martin Traub, Fraunhofer ILT, Aachen (D)
14:30 - 15:00
Development of Performance and Efficiency of High Power Diode Lasers
Volker Krause, Laserline GmbH, Mülheim-Kärlich (D)
15:00 - 15:30
Recent Results and Future Scaling Potential of the T-Bar Design
Dr. Jens Biesenbach, DILAS Diodenlaser GmbH, Mainz-Hechtsheim (D)
15:30 - 16:00
Laser Scanner - A Crucial Step towards Automated Driving
Dr. Gunnar Busse, Valeo Schalter und Sensoren GmbH, Bietigheim-Bissingen (D)
Outlook
Room BerlinChairman: Prof. Reinhart Poprawe, Fraunhofer ILT, Aachen (D)
16:00 - 16:30
Outlook
Prof. Reinhart Poprawe, Fraunhofer ILT, Aachen (D)
Outlook
Room BerlinChairman: Prof. Reinhart Poprawe, Fraunhofer ILT, Aachen (D)
16:00 - 16:30
Outlook
Prof. Reinhart Poprawe, Fraunhofer ILT, Aachen (D)
Eurogress Aachen
Monheimsallee 48
52062 Aachen
Germany
Eurogress Aachen
Monheimsallee 48
52062 Aachen
Germany
Eurogress Aachen
Monheimsallee 48
52062 Aachen
Germany
Eurogress Aachen
Monheimsallee 48
52062 Aachen
Germany
Eurogress Aachen
Monheimsallee 48
52062 Aachen
Germany
City Hall
Markt
52062 Aachen
Germany
Fraunhofer ILT
Steinbachstraße 15
52074 Aachen
Germany
Photonics Cluster
Campus-Boulevard 79
52074 Aachen
Germany
Eurogress Aachen
Monheimsallee 48
52062 Aachen
Germany
Eurogress Aachen
Monheimsallee 48
52062 Aachen
Germany
Please note: Subject to change without notice.
The Innovation Award Laser Technology is a European research prize awarded at 2-yearly intervals by the association Arbeitskreis Lasertechnik e.V. and the European Laser Institute ELI.
